Basic Liquid Filtration
Basic Gas Filtration , .8 CEUs ,
Monday, October 15, 8am- 5pm, Kensington Court Hotel,
Ann Arbor, MI

Basic Liquid Filtration & Separation – Learn the overall spectrum of solid/liquid separation. Understand the principles behind your filtration so your filter meets your needs. Realize the competing technologies.
Basic Short Courses (Meet together for first hour, then break into separate classes)
See the notes for the first half hour of the class.
Time |
Course Content |
7:00-8:00 |
Registration |
8:00-8:20 |
Introduction |
8:20-9:00 |
Particles and Fluid Properties |
9:00-9:50 |
Principles of Liquid Filtration |
9:50-10:10 |
Break |
10:10-11:00 |
Liquid Filtration Equipment I |
11:00-11:10 |
Break |
11:10-12:00 |
Liquid Filtration Equipment II |
12:00-13:15 |
Lunch Break |
13:15-14:00 |
Liquid Filtration Media |
14:00-14:10 |
Break |
14:10-14:40 |
Liquid Filter Performance, Testing and Standards |
14:40-15:00 |
Liquid Filter Performance, Testing and Standards |
15:00-15:10 |
Break |
15:10-16:00 |
Filter Aid |
16:00-17:00 |
Panel Discussion and Award of Course Certificate |
top
Biography of Instructors
Liquid Filtration (in alphabetical order)
WU CHEN
B-1402
Dow Chemical
Freeport , TX 77541
e-mail: wuchen@dow.com
Dr. Wu Chen is a Sr. Specialist with the Dow Chemical Company. He has over 20 years of practical experience in the field of solid/liquid separation technology including filtration, sedimentation, centrifugation, flocculation, particle characterization and system design. He gets his B.S. degree in Chemical Engineering from National Taiwan Univ., M.S. and Ph.D. degree in Chemical Engineering from Univ. of Houston under the guidance of Prof. Frank Tiller who is honored as the father of the modern filtration theory.
He is currently the chair of AFS Education Committee. He has served as the chair of AFS, board of directors, and conference chairs in the past. His was awarded AFS Frank Tiller Award in 2002 and AFS Wellshoemaker Award in 2005. He also teaches the solid/liquid separation course at the American Institute of Chemical Engineers continuing education program.
DONALD KRAUSE
Flow Ezy Filters, Inc.
PO Box 1749
Ann Arbor, MI 48106
e-mail: donkrause@flowezyfilters.com
Don is the General Manager of Flow Ezy Filters, Inc. manufacturer of hydraulic, pneumatic, air, oil, and fuel filters, since 1993. He graduated from University of Detroit, Detroit, MI, 1971, with B.A. in Social Work/Human Resources Management and minor in Psychology. He later attended Washtenaw College, Ann Arbor, MI, 1994, studied Fluid Power, Hydraulics, Business Law, and Business Management.
He is the author of Basic Filtration Seminar I, manual used in conjunction with seminar presentation, and A Simplified Study in Filtration. He also authors the monthly newsletter, "Flow Ezy Product and Service Information Newsletter" and articles appeared in various Fluid Power and related publications, such as:
"Give Filtration Top Priority for Cleaning Machines"
"The Importance of Fluid Filtration in the Hydraulic System"
"The Art of Good Customer Service"
"For Those Who Are Opposed to Change"
GERARD J. LYNCH, P.E.
Sigma Design Company
43 Commerce Street
Springfield, New Jersey 07081
e-mail: gjlynch@sigmadesign.net
Jerry has 25+ years of experience in management, design engineering, and manufacturing operations. He has extensive experience in filtration and separation technologies and his specialties are; advanced engineering analysis product development, and efficient manufacturing work cell design. Mr. Lynch is currently the President of Sigma Design Company, design engineering and manufacturing consulting firm serving manufacturers and industrial clients. Industry experience includes: aeronautical, biotechnology, chemical processing, environmental, medical device, renewable energy, offshore marine and shipbuilding. Jerry is a member of the American Filtration and Separations Society (AFS). He is currently the AFS Chairman for 2006-2007, and has been an AFS board member since 1999 serving as Chapter Affairs Chairman and he is still the President of the Mid Atlantic Chapter. Other areas of technical involvement include ASTM, Society of Naval Architects and Marine Engineers, American Society of Mechanical Engineers, and the Society of Manufacturing Engineers. Education: MS Stevens Institute of Technology: Hoboken, New Jersey, BE Engineering; State University of New York: Stony Brook. Mr. Lynch is a licensed professional engineer in the States of NY & NJ. He is a certified NIST practioner and trainer for manufacturing improvement including Six Sigma and Lean Manufacturing techniques.
ERNEST MAYER
DuPont
Experimental Station E304/B152
Rtes. 141 & 52
Wilmington , DE 19808
e-mail: Ernest.Mayer-1@usa.dupont.com
Dr. Mayer is a Senior Consultant with DuPont, Wilmington, DE specializing in SLS technology since 1980. He gets his B.S. and M.S. Chem. Eng. degree from Columbia University, New York City, NY and Ph.D. of Chem. Eng. from U,of Delaware, Newark, DE. Dr. Mayer has a brilliant professional career, among his numerous awards are Tau Beta Pi, Sigma Xi, Deans' Lists, 3 Eng. Excellence Awards, 5 Environmental Respect Awards, Class 'A' bonus, AFS Tiller award in 1995 and AFS Fellow award in 2000.
He is a member of AWWA, AICHE, SME, WEF, IBA, and AFS&S (Board of Directors since 1988, Chairman of Users Committee; plus member of two other committees). He has organized/chaired one technical conference and is the Co-chair of World Filtration Congress in 2004. He published over 200 papers/publications and 2 patents. In 1991, a remediation technology developed by him was accepted into the EPA SITE program.
His name is listed in Who's Who in America; Who's Who in Science and Environmental Technology; etc.
ANDY ROSOL
Eagle Picher Filtration & Minerals, Inc.
9785 Gateway Drive, Suite 1000 ,
Reno , NV 89521
email: Andy.Rosol@eaglepicher.com
Andy Rosol is a Manager Technical Services with EPFM, Reno, NV, specializing in precoat filtration since 1987. He gets his M.S. Chem.E degree from University of Technology in Gliwice, Poland. He has more than 33 years of professional experience ranging from oil refining, coal mining and processing to waste water purification and food and pharmaceutical processing. Andy holds a polish patent (# 107761) and is an author or co-author of several professional papers.
Registration Rates
Short Courses With Conference Registration
Full Day Courses
Members - $400
Non-members - $500
Short Courses With NO Conference Registration
Full Day Courses
Members - $550
Non-members - $650

Other Short Courses
Emissions Solutions in Transportation Conference
top |